Beta. For info, 800-210-0032

Laybrick filament, 3mm

$ 33.00

Description


Laybrick is a mineral based filament that can be used in most desktop 3D printers available. The stone filament prints easily, similar to PLA, and can have a smooth finish or a rough texture based on the extrusion temperature.

The material shows very little warp and does not need to be printed on a heated bed. The material is brittle compared to other 3D printer filaments, so it is best for models and especially great for architectural models. The extrusion temperature ranges similar to PLA, from 180C - 200C with 185C being the normal extrusion temperature. Hotter temperatures will result in a rougher texture.

In general, if you have printed with PLA you should be able to quickly start printing with the Laybrick filament. This 3mm diameter filament comes in a 0.25kg coil.

 

 

Laybrick 3D printer setting:
Extrusion temperature: 180-200°C. With 185C being normally used




 
 

Official Reseller
3D printers and supplies
Open Source Supporter
Partners